PT Cruiser L4-2.4L Turbo VIN G (2004)
Hydraulic Control Assembly - Antilock Brakes: Description and Operation
ICU (Integrated Control Unit)
ICU (INTEGRATED CONTROL UNIT)
DESCRIPTION
The Hydraulic Control Unit (HCU) and the Controller Antilock Brake (CAB) used with this antilock brake system are combined (integrated) into one
unit, which is called the Integrated Control Unit (ICU). The ICU is located on the driver's side of the vehicle, below the master cylinder. The ABS
with traction control ICU consists of the following components: the CAB, eight (build/decay) solenoid valves (four inlet valves and four outlet
valves), two hydraulic shuttle valves, two traction control valves, valve block, fluid accumulators, a pump, and an electric pump/motor.
The replaceable components of the ICU are the HCU and the CAB. No attempt should be made to service any components of the HCU or CAB.