PT Cruiser L4-2.4L Turbo VIN G (2004)
7. Remove the two bolts securing the disc brake caliper adapter to the steering knuckle.
8. Remove the disc brake caliper adapter.
INSTALLATION
1. Install the disc brake caliper adapter on the steering knuckle.
2. Install the two bolts securing the disc brake caliper adapter to the steering knuckle. Tighten the bolts to a torque of 104 Nm (77 ft. lbs.).
3. Attach the two abutment shims to the adapter fitting the contour of each shim to the adapter's contour.
4. Place the brake shoes in the abutment shims clipped into the disc brake caliper adapter as shown. Place the shoe with the wear indicator attached
on the inboard side.
CAUTION: Use care when installing the caliper onto the disc brake adapter to avoid damaging the boots on the caliper guide pins.
5. Install the disc brake caliper over the brake shoes on the brake caliper adapter. Make sure the springs on the shoes do not get caught in the hole
formed into the center of the caliper housing.
