PT Cruiser L4-2.4L Turbo VIN G (2004)
Removing Installing Inboard Brake Shoe
2. Install the inboard brake shoe into the caliper piston by firmly pressing the shoe in with the thumbs. Be sure the inboard brake shoe is positioned
squarely against the face of the caliper piston.
3. Slide the outboard brake shoe onto the caliper assembly. Be sure the retaining clip is squarely seated in the depressed areas on the caliper.
4. Lubricate both adapter caliper slide abutments with a liberal amount of Mopar Multipurpose Lubricant, or an equivalent.
CAUTION: Use care when installing the caliper assembly onto adapter so the guide pin bushings and sleeves do not get damaged by the
mounting bosses on adapter.
