PT Cruiser L4-2.4L Turbo VIN G (2004)
Brake Proportioning/Combination Valve: Service and Repair
Proportioning Valve
REMOVAL
NOTE: Before proceeding, Refer to Service Precautions.
1. Using a brake pedal holder, depress the brake pedal past its first one inch of travel and hold it in this position. This will isolate the master cylinder
from the brake hydraulic system and will not allow the brake fluid to drain out of the master cylinder reservoir.
NOTE: To access the lower (left rear) proportioning valve, it may help to remove the air cleaner cover and hose to the throttle body.
2. Disconnect the brake tube from the proportioning valve requiring removal.
3. Unscrew the Proportioning valve from the master cylinder.
INSTALLATION
1. Lubricate the O-ring on the proportioning valve. Make sure the O-ring on the proportioning valve is new.
2. Install the proportioning valve in its master cylinder port. Tighten the proportioning valve to a torque of 40 Nm (30 ft. lbs.).
