PT Cruiser L4-2.4L Turbo VIN G (2004)
Wheel Cylinder: Service and Repair
WHEEL CYLINDER DRUM BRAKE
REMOVAL
NOTE: Before proceeding, Refer to Service Precautions.
1. Using a brake pedal holder, depress the brake pedal past its first one inch of travel and hold it in this position. This will isolate the master cylinder
from the brake hydraulic system and will not allow the brake fluid to drain out of the master cylinder reservoir.
2. Raise the vehicle.
3. Remove the rear tire and wheel assembly.
4. Disconnect the rear brake flex hose from the wheel cylinder.