PT Cruiser L4-2.4L Turbo VIN G (2004)
6. Keeping your hands clear of the automatic adjuster sector and pawl area, firmly grasp the parking brake lever pin punch (drill bit or locking pin if
a new mechanism has been installed), then quickly remove it from the parking brake lever mechanism. This will allow the park brake lever
mechanism to automatically adjust the parking brake cables.
7. Install center console and mounting screws.
8. Install rear window switch panel.
9. Cycle the parking brake lever once to position the parking brake cables, then return the parking brake lever its released (full OFF) position.
10. Check the rear wheels of the vehicle. They should rotate freely without dragging with the lever in its released (full OFF) position.
11. Apply the parking brake.
12. Remove the blocks from the tires and wheels.
13. Reconnect the battery negative terminal.
14. Reinstall the air cleaner cover (two clips).
