PT Cruiser L4-2.4L Turbo VIN G (2004)
Valve Cover: Service and Repair
CYLINDER HEAD COVER
REMOVAL
1. Remove upper intake manifold.
2. Remove ignition coil and spark plug wires.
3. Disconnect PCV and make-up air hoses from cylinder head cover (Fig. 36).
4. Remove cylinder head cover bolts.
CAUTION: When removing cylinder head cover bolts, be careful not to interchange the two (2) center bolts with the seven (7) perimeter bolts.
The two (2) center bolts contain an aluminum washer between the bolt head and torque limiter for sealing purposes.
5. Remove cylinder head cover from cylinder head.
INSTALLATION
NOTE: Replace spark plug well seals and bolt seals when installing a new cylinder head cover gasket.
