PT Cruiser L4-2.4L Turbo VIN G (2004)
Exhaust Pipe/Muffler Hanger: Service and Repair
SUPPORT BRACKETS AND ISOLATORS
REMOVAL
1. Disconnect isolator from exhaust system component.
2. Remove screws attaching isolator bracket to underbody .
3. Remove isolator assembly.
INSTALLATION
1. Position isolator bracket to underbody and install attaching screws. Tighten bracket screws to frame rail to 8.5 Nm (75 inch lbs.) and bracket
screws to the rear panel to 3.7 Nm (33 inch lbs.).
2. Connect isolator to exhaust system component.
