PT Cruiser L4-2.4L Turbo VIN G (2004)
Control Assembly: Service and Repair
A/C Heater Control
REMOVAL
1. Remove the instrument panel center stack bezel.
HVAC Center Air Duct & A/C-Heated Control
2. Remove the center air duct.
3. Remove the screws that secure the A/C-heater control to the instrument panel.
4. Remove the A/C-heater control from the instrument panel.
A/C-Heated Control
5. Disconnect the vacuum harness, control cables and wire harness from the A/C-heater control.
INSTALLATION
1. Connect the vacuum harness, control cables and wire harness to the back of the A/C-heater control and adjust the mode and temperature control
cables.
2. Install the A/C-heater control to the instrument panel. Tighten the screws to 2.3 Nm (20 in. lbs.).
3. Install the center air duct.
