PT Cruiser L4-2.4L Turbo VIN G (2004)
2. Loosen the tie rod adjusting jam nuts. Grasp each inner tie rod at its splines and rotate it one way or the other until the front wheel toe is set to the
preferred specification.
3. Tighten tie rod adjusting jam nuts to a torque of 75 Nm (55 ft. lbs.).
4. Make sure the inner tie rod-to-steering gear rubber boots are not twisted. If twisted, loosen the boot clamp at the inner tie rod and move the boot as
necessary.
5. Remove steering wheel clamp.
6. Remove the alignment equipment.
7. Road test the vehicle to verify the steering wheel is straight and the vehicle does not pull or wander.
NOTE: All wheel alignments are to be set with the vehicle at curb height.
