chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

NV T350 - Manual Transaxle|Page 1337 > < Mechanical Specifications|Page 1334
Page 1
background image

Fluid - M/T: Service and Repair
NV T350 - Manual Transaxle

Fluid Level Check

FLUID LEVEL CHECK

Check the fluid level by removing the fill plug.

The fluid level should be between the bottom of the fill hole and a point not more than that 4.7 mm (3/16") below the bottom of the hole.

Fluid Drain and Fill

 DRAIN / FILL PLUGS 

NOTE: Two types of fluid are available in manual transaxle equipped PT models, depending on where the vehicle is manufactured. Always add or

replace fluid removed or lost with the fluid the transaxle was originally built with. Use fluid color as an indicator. Do not mix fluid types.

Domestic Vehicles .................................................................................................................................  Mopar Manual Transaxle Lubricant Type 9417

Export Vehicles ........................................................................................................................................................................  Mopar ATF +4, Type 9602

The transaxle fill plug is located on the left side of the transaxle differential area (Fig. 99). The fluid level should be within 3/16 inch from the bottom of
the transaxle fill hole (vehicle must be level when checking).

The transaxle drain plug is located on the lower right side of the transaxle differential housing (Fig. 100). Tighten drain plug to 28 Nm (250 in. lbs.)

NV T350 - Manual Transaxle|Page 1337 > < Mechanical Specifications|Page 1334