PT Cruiser L4-2.4L Turbo VIN G (2004)
Fuse Block: Description and Operation
Fuse Block
FUSE BLOCK
Fuse Block Location
DESCRIPTION
An electrical Fuse Block is located in the left front lower instrument panel (Fig 6). It serves to simplify and centralize numerous electrical components,
as well as to distribute electrical current to many of the accessory systems in the vehicle.
The Fuse Block is positioned on a mounting bracket up and under the left instrument panel. It is secured by two screws. The fuse block is concealed
behind a fuse panel cover. The fuse panel cover is a snap-fit access cover that conceals the fuse block fuses. A fuse layout placard is on the back of the
end cap to ensure proper fuse identification.
OPERATION
The fuse block houses blade-type fuses and automatic resetting circuit breakers. Internal connection of all the fuse block circuits is accomplished by an
intricate network of hard wiring and bus bars. Refer to Wiring Diagrams for complete circuit diagrams.
The fuses and circuit breakers are available for service replacement. The fuse block unit cannot be repaired and is only serviced as an assembly If any
circuit or the fuse block housing is faulty or damaged, the entire fuse block and instrument panel wire harness assembly must be replaced.
