PT Cruiser L4-2.4L Turbo VIN G (2004)
Leak Detector: Service and Repair
NATURAL VACUUM LEAK DETECTION ASSEMBLY
REMOVAL
1. Release fuel pressure, Refer to Fuel System Pressure Release Procedure in the Fuel Delivery.
2. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
3. Remove the negative battery cable.
4. Raise vehicle and support.
5. Drain fuel tank, refer to Draining Fuel Tank in the Fuel Delivery.
Fig. 5 Fuel Tank Assembly
Fig. 6 EVAP System
6. Remove fuel tank and EVAP system, refer to the Fuel Tank removal/installation in the Fuel Delivery.
7. Remove hoses from NVLD assembly.
8. Remove the bolts from the NVLD Assembly