PT Cruiser L4-2.4L Turbo VIN G (2004)
Fuel Pressure Regulator: Service and Repair
REMOVAL
Fig. 7 Fuel Pressure Regulator Retainer
The fuel pressure regulator is part of the fuel pump module (Fig. 7). Remove the fuel pump module from the fuel tank to access the fuel pressure
regulator. Refer to the Fuel Pump Module removal.
WARNING: FUEL SYSTEM PRESSURE MUST BE RELEASED BEFORE SERVICING ANY FUEL SYSTEM COMPONENT. PERFORM
THE FUEL SYSTEM PRESSURE RELEASE PROCEDURE.
1. Spread tangs on pressure regulator retainer (Fig. 7).
2. Pry fuel pressure regulator out of housing.
Fig. 8 Fuel Pressure Regulator Retainer
3. Ensure that the O-ring was removed with regulator (Fig. 8).
INSTALLATION
The fuel pressure regulator is part of the fuel pump module (Fig. 7). Remove the fuel pump module from the fuel tank to access the fuel pressure
regulator. Refer to the Fuel Pump Module removal.
1. Lightly lubricate the O-ring with clean engine oil and place them into opening in pump module.