PT Cruiser L4-2.4L Turbo VIN G (2004)
Throttle Body: Service and Repair
REMOVAL - 2.4L TURBO
1. Disconnect the negative battery cable.
2. Unlock and disconnect the electrical connector for the inlet air temperature sensor.
3. Unlock and disconnect the electrical connectors from the idle air control motor and throttle position sensor.
Fig. 54 Throttle Control Shield - 2.4L Turbo
4. Remove the throttle control shield (Fig. 54).
Fig. 55 Throttle Cables
5. Remove the throttle cable from the throttle body lever (Fig. 55).
6. If equipped with speed control, remove speed control cable from the throttle lever by sliding clasp out hole used for throttle cable.
7. Remove the 2 screws for the throttle cable bracket.
