PT Cruiser L4-2.4L Turbo VIN G (2004)
Air Bag: Service and Repair
Driver Airbag
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable. Wait two minutes for the capacitor to discharge.
3. Remove upper and lower steering column shrouds to gain access to clock spring wiring.
Fig. 9 Driver Airbag Retaining Pin
Fig. 10 First Driver Airbag Retaining Pin - Removal
4. Using a pair of 90° internal snap ring pliers or equivalent, pry open the retaining clip on the back of the steering wheel to release the retaining pin.
Pull or press rearward on the driver airbag while doing this. The pin will release slightly.
