PT Cruiser L4-2.4L Turbo VIN G (2004)
Lock Cylinder Switch: Service and Repair
Liftgate Cylinder Lock Switch Replacement
REMOVAL
1. Open hood.
Fig.4 Battery Negative Cable Remove/Install
2. Disconnect and isolate the battery negative cable.
3. Remove the liftgate trim panel.
4. Remove the liftgate cylinder U-bracket by sliding it out.
5. Remove switch E-clip and disconnect connector.
Fig. 8 Liftgate Cylinder Lock Switch Location
6. Remove liftgate cylinder lock switch from liftgate lock cylinder by gently unsnapping.
INSTALLATION