PT Cruiser L4-2.4L Turbo VIN G (2004)
Seat Heater Switch: Service and Repair
Passenger Heated Seat Switch
REMOVAL
1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
2. Remove the appropriate seat cushion side shield. Refer to the Body for the procedure.
3. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
INSTALLATION
1. Gently rock the switch back and forth in to its mounting location.
2. Install the appropriate seat cushion side shield. Refer to the Body for the procedure.
3. Connect the remote negative battery cable.
