PT Cruiser L4-2.4L Turbo VIN G (2004)
Power Window Switch: Service and Repair
REMOVAL
Front
1. Disconnect and isolate the battery negative cable.
Window Switch Removal (Rear Shown - Front Similar)
2. Using a trim stick (special tool #C-4755) or equivalent, gently pry at the top of the switch.
Front Window Switch
3. Remove switch and disconnect electrical harness connector.
Rear
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool #C-4755) or equivalent, gently pry at the top of the switch.
