chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Power Interrupt Connector/Switch|Description and Operation|Page 6387 > < Power Distribution Relay|Description and Operation
Page 1
background image

Power Interrupt Connector/Switch: Description and Operation

DESCRIPTION

All vehicles are equipped with an Ignition-Off Draw (IOD) fuse that is disconnected within the Power Distribution Center (PDC) when the vehicle is
shipped from the factory Dealer personnel are to reconnect the IOD fuse in the PDC as part of the preparation procedures performed just prior to new
vehicle delivery

OPERATION

The term ignition-off draw identifies a normal condition where power is being drained from the battery with the ignition switch in the Off position.
The IOD fuse feeds the memory and sleep mode functions for some of the electronic modules in the vehicle as well as various other accessories that
require battery current when the ignition switch is in the Off position, including the clock. The only reason the IOD fuse is disconnected is to reduce
the normal IOD of the vehicle electrical system during new vehicle transportation and pre-delivery storage to reduce battery depletion, while still
allowing vehicle operation so that the vehicle can be loaded, unloaded and moved as needed by both vehicle transportation company and dealer
personnel.

The IOD fuse is disconnected from PDC fuse cavity 18 when the vehicle is shipped from the assembly plant. Dealer personnel must reconnect the IOD
fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation. Once the vehicle is prepared for delivery, the
IOD function of this fuse becomes transparent and the fuse that has been assigned the IOD designation becomes only another Fused B(+) circuit fuse.
The IOD fuse serves no useful purpose to the dealer technician in the service or diagnosis of any vehicle system or condition, other than the same
purpose as that of any other standard circuit protection device.

The IOD fuse can be used by the vehicle owner as a convenient means of reducing battery depletion when a vehicle is to be stored for periods not to
exceed about thirty days. However, it must be remembered that disconnecting the IOD fuse will not eliminate IOD, but only reduce this normal
condition. If a vehicle will be stored for more than about thirty days, the battery negative cable should be disconnected to eliminate normal IOD; and,
the battery should be tested and recharged at regular intervals during the vehicle storage period to prevent the battery from becoming discharged or
damaged.

Power Interrupt Connector/Switch|Description and Operation|Page 6387 > < Power Distribution Relay|Description and Operation