PT Cruiser L4-2.4L Turbo VIN G (2004)
(1) Place the power steering pump pulley squarely on end of the power steering pump shaft. Mount Installer, Special Tool C-4063, or an
equivalent, in the internal threads of the power steering pump shaft and against power steering pump pulley (Fig.23).
Fig. 23 Pulley Installation
(2) Ensuring that the installer and the pulley remain aligned with the pump shaft, turn the installer outer nut and force the pulley onto the power
steering pump shaft until it is flush with the end of the pump shaft. Once the pulley is flush with the end of the shaft, the installer outer nut will
no longer be able to turn.
(3) Remove the installer from the power steering pump.
(4) Install the power steering pump back on the engine. See: Removal and Installation
