PT Cruiser L4-2.4L Turbo VIN G (2004)
19. Using an awl, scribe a line marking the location of where the front suspension crossmember is mounted against the body of the vehicle.
20. Position a transmission jack under the center of the front suspension crossmember and raise it to support the bottom of the crossmember.
21. Loosen all six bolts attaching the front suspension crossmember to the frame rails of vehicle. Do not completely remove the two mounting bolts
going through the lower control arm rear isolator bushings. They are designed to disengage from the body threads yet stay within the lower control
arm rear isolator bushing. Back the two bolts out just enough to disengage the threaded tapping plates in the body of the vehicle. Completely
remove the other four bolts.
22. Lower the front suspension crossmember using the transmission jack enough to allow the power steering gear to be removed from the rear of the
crossmember. When lowering front suspension crossmember, do not let crossmember hang from lower control arms. The weight should be
supported by the transmission jack.
