PT Cruiser L4-2.4L Turbo VIN G (2004)
Steering Shaft Coupler: Service and Repair
STEERING COUPLING LOWER
REMOVAL
NOTE: Before proceeding, Refer to Service Precautions.
1. Place the steering wheel in the STRAIGHT AHEAD position. Using a steering wheel holder, lock the steering wheel in place to keep it from
rotating. This keeps the clock spring in the proper orientation.
2. Remove the silencer pad below the knee blocker panel below the steering column.
3. Fold down and remove the knee blocker.
4. Remove the steering column coupling retainer pin, back off the pinch bolt nut, and remove the steering column coupling pinch bolt (the pinch bolt
nut is caged to the coupling and is not removable). Separate the upper and lower steering column couplings.
5. Raise the vehicle.
6. Release the locking tab on the wiring harness connector for the power steering fluid pressure switch, then remove the wiring harness connector
from the power steering fluid pressure switch.