PT Cruiser L4-2.4L Turbo VIN G (2004)
13. Install the OD/UD clutch reaction plate and snap ring (Fig. 254) (Fig. 255). The OD/UD clutches reaction plate has a step on both sides. Install the
OD/UD clutches reaction plate tapered step side up.
NOTE: Snap ring ends must be located within one finger of the input clutch hub. Be sure that snap ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
14. Seat tapered snap ring to ensure proper installation (Fig. 256).
