PT Cruiser L4-2.4L Turbo VIN G (2004)
33. Using moderate pressure, press down and hold (near indicator) reverse clutch disc with screwdriver or suitable tool and zero dial indicator (Fig.
270). When releasing pressure, indicator should advance 0.005 - 0.010. as clutch pack relaxes.
34. Apply 30 psi (206 kPa) air pressure to the reverse clutch hose on Tool 8391. Measure and record reverse clutch pack measurement in four (4)
places, 90°apart.
35. Take average of four measurements and compare with reverse clutch pack clearance specification. The reverse clutch pack clearance is 0.89 - 1.37
mm (0.035 - 0.054 inch). Select the proper reverse clutch snap ring to achieve specifications:
36. To complete the assembly, reverse clutch and overdrive clutch must be removed.
