PT Cruiser L4-2.4L Turbo VIN G (2004)
2. Remove the center console assembly as shown in (Fig. 301).
3. Remove shifter bezel (Fig. 302).
4. Adjust interlock cable/system as follows: Pry up on cable adjuster lock to release and allow cable to "self-adjust". Lock cable adjustment by
pressing down on the adjuster lock until bottomed at the cable housing.
5. Verify correct system operation.
6. Install shifter bezel (Fig. 302).
7. Install center console assembly (Fig. 301).
8. Install gearshift knob and tighten set screw to 2 Nm (17 in. lbs.) torque (Fig. 300).
