PT Cruiser L4-2.4L Turbo VIN G (2004)
Fig. 142 Gearshift Boot Removal/Installation
INSTALLATION
1. Position gearshift boot (Fig. 142) over the gearshift mechanism and engage tab on mount ring at front to opening in console. Apply hand pressure
to engage bosses on mount ring of boot to console opening slots.
Fig. 141 Gearshift Knob Removal/Installation
2. Position gearshift knob hole over the gearshift mechanism (Fig. 141) and align the shift pattern.
3. Strike knob with rubber mallet to engage knob to mechanism.
4. Verify that shift pattern is aligned properly.