PT Cruiser L4-2.4L Turbo VIN G (2004)
Wiper Switch: Service and Repair
Front Wiper/Washer Switch Replacement
REMOVAL
To service the front wiper/washer switch, the multi-function switch must first be removed.
1. Open hood.
Fig. 12 Battery Negative Cable - Remove/Install
2. Disconnect and isolate the battery negative cable.
3. Remove both upper and lower steering column shrouds.
Fig. 16 Multi-Function Switch - Remove/Install
4. Disconnect both posi-lock harness connectors at the rear of the multi-function switch
5. Remove multi-function switch mounting screws and remove switch from vehicle.