PT Cruiser L4-2.4L Turbo VIN G (2004)
Wiper Arm: Service and Repair
Rear Wiper Arm Replacement
REMOVAL
1. Remove the rear wiper arm nut cap
2. Remove wiper arm retaining nut.
Wiper Arm Puller
3. Use a battery terminal puller to remove the wiper arm from the wiper pivot.
INSTALLATION
Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arm so that the tip of the blade is on the
park line on the windshield.
NOTE: Blade should be parked along bottom rear window defogger grid line. Vertical tick mark shows park tolerance.
Fig.5 Rear Windshield Wiper Arm Remove/Install
