Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Keyless Entry Transmitter Battery: Service and Repair
BATTERY REPLACEMENT
1. Insert a screwdriver in a slit in the transmitter case and pry it lightly to open the case. Then take the battery out of the transmitter.
2. Install a new battery with its positive side down.
Replacement battery: Coin-type battery CR2016 x 2
3. Firmly close the transmitter case.
4. Check that the keyless entry system operates properly.
Caution: When the transmitter is opened, be careful not to allow water, dust, etc. to stick to the transmitter. In addition, do not touch the precision
electronic device.