Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Fig. 69 Camshaft Bearing Caps
3. Loosen camshaft bearing cap attaching bolts in sequence shown in Fig.69, one camshaft at a time.
4. Remove camshaft oil seals using suitable screwdriver to pry seal out.
INSTALLATION
Fig. 70 Camshaft Oil Seal Installation
1. Install new camshaft oil seals using special oil seal seating tools No. MB991554 and MB998713, or equivalents, Fig.70.
2. Ensure piston is not at top dead center when installing camshaft.
