Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
CAUTIONS:
-
When loosening a Phillips screw which has been firmly tightened, use a Phillips screwdriver that is an exact fit for the screw.
-
Do not remove the throttle valve.
-
Be careful when removing the IAC (AIS) motor mounting screws, as adhesive has been applied to these screws.
CAUTION: Do not use solvent to clean this part. If this part is immersed in solvent, the insulation will deteriorate. Wipe this part with shop towel
only.