Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
13. Fuel pressure regulator:
a. Apply a small amount of clean engine oil to a new O-ring and insert it to the fuel rail carefully.
CAUTION: Do not let the engine oil get into the fuel rail.
b. If the fuel pressure regulator does not move smoothly, the O-ring may be folded. Then, remove the regulator to check the O-ring for damage.
12. Snap ring
11. 0-rings
10. 0-rings
9. Injectors:
a. Apply a small amount of clean engine oil to the O-ring.
CAUTION: Do not let the engine oil get into the fuel rail.
b. While turning the injector to the left and right, install it to the fuel rail.
c. Check to be sure that the injector turns smoothly. If it does not turn smoothly, the O-ring may be trapped, remove the injector and then reinsert
it into the fuel rail and check again.
8. Retainers
7. Injector connectors
6. Remove the fuel rail (with the injectors attached to it.)
5. Injector harness connector
4. Vacuum hose connection
3. Fuel return hose connection
2. Remove 0-ring.
1. High-pressure fuel hose connection: When connecting the high pressure fuel hose to the fuel rail, apply a small amount of engine oil to the hose
union, and then insert, being careful not to damage the O-ring.
CAUTION: Do not let the engine oil get into the fuel rail.
POST-INSTALLATION OPERATION
1. Connect battery and install Air Intake Hose.
2. Pressurize system and inspect for Fuel Leaks.
