Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Throttle Body: Service and Repair
CAUTIONS:
-
When loosening a Phillips screw which has been firmly tightened, use a Phillips screwdriver that is an exact fit for the screw.
-
Do not remove the throttle valve.
-
Be careful when removing the IAC (AIS) motor mounting screws, as adhesive has been applied to these screws.
CLEANING THROTTLE BODY PARTS
1. Clean all throttle body parts.
CAUTION: Do not use solvent to clean the following parts since if these parts are immersed in solvent, their insulation will deteriorate. Wipe
them with shop towel only.
-
Throttle position sensor
-
IAC (AIS) motor
2. Check if the vacuum port or passage is clogged. Use compressed air to clean the vacuum passage.
