chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Air Bag Deactivation Switch > < Air Bag Control Module|Locations|Page 9109
Page 1
background image

Air Bag Control Module: Service and Repair

The ACM/Air Bag System Diagnostic Module (ASDM) and SRS diagnosis unit (SDU) contain one of the impact sensors which enables system to
activate air bag. The ACM/Air Bag Electronic Control Module (AECM) and SRS air bag control unit (SRS-ECU) contain the impact sensors which
enables system to activate air bag.

To avoid accidental deployment, never connect ACM/ASDM, ACM/AECM, SDU or SRS-ECU electrically to system unless it is bolted to
vehicle.

1. Disarm air bag as described under Air Bag System Disarming & Arming at Air Bag Systems/ Service and Repair.
2. Remove manual transaxle shift lever knob, ashtray and inner or accessory box.
3. Remove center console panel, floor console panel assembly and floor console.
4. Remove SDU harness connectors, then SDU and bracket.
5. Reverse procedure to install.

Air Bag Deactivation Switch > < Air Bag Control Module|Locations|Page 9109