Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Rear Knuckle: Service and Repair
1. Raise and support vehicle.
2. Remove rear hub as described under "Hub & Bearing, Replace".
3. Disconnect trailing arm.
4. Disconnect lower arm.
5. Disconnect toe control arm. Loosen nut but do not remove.
6. Disconnect shock absorber.
7. Disconnect upper arm.
8. Remove knuckle.
9. On models less ABS, remove hub cap.
10. On all models, reverse procedure to install. Tighten to specifications.
