Sebring L4-122 2.0L DOHC VIN Y MFI (1995)
Clutch Master Cylinder: Service and Repair
1. Drain clutch hydraulic fluid into a suitable container.
Fig. 5 Clutch Hydraulic System Component Replacement
2. Remove master cylinder, slave cylinder and/or hydraulic lines in numbered sequences shown.
3. Reverse procedure to install, noting the following:
a. Fill and bleed clutch hydraulic system as outlined under "Hydraulic System Service".
b. Adjust clutch pedal as outlined under "Clutch Pedal Adjustment".
c. Tighten all fasteners to specifications.
