Sebring V6-2.5L SOHC 24 Valve (1996)
Console: Customer Interest
Console Cup Holder - Lid Comes Off
NO: 23-44-96
GROUP: Body
EFFECTIVE DATE: Aug. 9, 1996
SUBJECT:
Console Cup Holder Repair/
Parts Availability
MODELS:
1995 - 1996 (FJ) Avenger/Sebring
SYMPTOM/CONDITION:
Service parts have been released to allow the console cupholder to be repaired rather than replaced. Some 1995 or 1996 models built before March 15,
1996 (MDH 03-15-XX) may have the pivot shaft, which connects the cup holder lid to the cup holder, shift out of position allowing the lid to come apart
from the holder.
DIAGNOSIS:
Visually inspect the cupholder for damage and inspect for proper operation.
PARTS REQUIRED:
As Needed for Repair
1
MR33O436
Cup Holder Lid
1
MR33O437
Cup Holder Lid (Wood Grain)
1
MR33O438
Cup Holder
1
MR33O434
Cup Holder Shaft (Requires Crimping Before
Installation)
1
MR33O435
Cup Holder Spring
REPAIR PROCEDURE:
This bulletin involves disassembling the cupholder assembly and crimping the metal pivot shaft to prevent shifting or replacing damaged components.
1.
Verify the condition by inspecting the cup holder for proper operation.
2.
Disassemble the cup holder from the console. Take care not to break any of the plastic pivot pins on the holder or lid.