chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Power Seat Switch - Sticks|Page 6338 > < Power Seat Switch - Sticks|Page 6332
Page 1
background image

Power Seat Switch: All Technical Service Bulletins
Power Seat Switch - Sticks

NO: 23-23-96

GROUP: Body

DATE: Apr. 12, 1996

SUBJECT: 
Power Seat Switch Sticks

MODELS: 
1995 - 1996 (FJ) Avenger/Sebring/Talon

SYMPTOM/CONDITION:

Some vehicles may exhibit a condition where the power seat switch may stick. This is caused by the seat switch garnish interfering with the switch,
causing it to stick.

PARTS REQUIRED:

1

MR732385

Garnish, Power Seat Switch (Brown)

1

MR732386

Garnish, Power Seat Switch (Gray)

1

MR732387

Garnish, Power Seat Switch (Blue)

REPAIR PROCEDURE:

This bulletin involves removing the seat switch garnish and replacing it with a new and improved part.

1.

Test switch operation to verify sticking condition.

2.

Remove the switch cover from the seat switch.

3.

Remove the switch garnish from the seat.

4.

Replace the switch garnish with a new part.

NOTE

MAKE SURE THERE IS NO INTERFERENCE BETWEEN THE GARNISH AND EXTRA SEAT COVER MATERIAL TO ENSURE
GARNISH SNAPS INTO PLACE PROPERLY.

Power Seat Switch - Sticks|Page 6338 > < Power Seat Switch - Sticks|Page 6332