Sebring V6-2.5L SOHC 24 Valve (1996)
CAUTION: Do not damage the crankshaft and the oil seal case.
INSTALLATION
1. Follow removal procedure in reverse order noting the following.
2. Apply a small amount of engine oil to the oil seal and then insert.
3. Tap the oil seal into the cylinder block.
4. Stop the crankshaft pulley from turning, and then tighten the bolts to the specified torque of 92 Nm (68 ft. lbs.).
CAUTION: Use only the specified special tools, or the crankshaft pulley damper could be damaged.
