Sebring V6-2.5L SOHC 24 Valve (1996)
Blower Motor: Testing and Inspection
Inspection
BLOWER FAN AND MOTOR CHECK
When battery voltage is applied between the terminals, check that the motor operates. Also, check an abnormal noise.
Resistor Resistance Check
RESISTOR RESISTANCE CHECK
Use an ohmmeter to measure the resistance between the terminals as indicated below. Check that the measured value is at the standard value.
Measurement Terminal
Standard Value -- Ohms
Between terminals 3 - 2 (LO)
1.83 ohms
Between terminals 3 - 4 (ML)
0.87 ohms
Between terminals 3 - 1 (MH)
0.31 ohms