chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A/T - Ratcheting Sound When Coming To Stop|Page 922 > < A/T - Ratcheting Sound When Coming To Stop|Page 920
Page 5
background image

3.

Install the new compression arm assembly(ies) in the reverse order. The offset arms have rounded ends and the standard arms have square ends
(Figure 2).

4.

Verify that the front toe adjustment and steering wheel center are correct. Adjust as required.

5.

Verify that the condition is corrected by road testing the vehicle on the same section of road used in step 3 under Diagnosis.

POLICY: Reimbursable within the provisions of the warranty.

Time Allowance
Labor Operation No:

02-00-01-96

Alignment, Front End

0.9 Hrs.

Includes Road Test

02-00-01-97

Alignment, Front End

1.2 Hrs.

 

Cross Switch Front Tires 
Includes Road Test.

02-10-05-90

Alignment, Front End

2.4 Hrs

Cross Switch Front Tires
Replace Compression Lower Arm 
Assemblies Includes Road Test.

FAILURE CODE:

XX - Service Adjustment
P8 - New Part

Technical Service Bulletin # 021395

Date: 951124

Front Suspension/Alignment - Vehicle Drift or Lead

NO: 02-13-95

GROUP: Suspension

DATE: Nov. 24, 1995

SUBJECT: 
Vehicle Drift or Lead

THIS BULLETIN SUPERSEDES THE INFORMATION LISTED IN TSB 02-22-94 DATED DEC. 16, 1994, WHICH SHOULD BE MARKED IN
YOUR FILES.

MODELS:

1995 - 1996 (FJ) Avenger/Sebring/Talon

SYMPTOM/CONDITION:

Steering drift or lead during normal straight line driving on uncrowned roads.

DISCUSSION:

A/T - Ratcheting Sound When Coming To Stop|Page 922 > < A/T - Ratcheting Sound When Coming To Stop|Page 920