Sebring V6-2.5L SOHC 24 Valve (1996)
Ignition Lock: Service and Repair
1. Disconnect battery ground cable.
2. Remove steering wheel as outlined under "Steering Wheel, Replace".
Fig. 4 Ignition Lock/switch & Multi-function Switch Replacement
3. Remove lower instrument panel plug.
4. Remove hood lock release handle.
5. Remove instrument panel under cover.
6. Remove steering column lower and upper covers.
7. Remove clockspring.
8. Remove column multi-function switch.
9. Remove ignition key illumination ring or ring cover.
10. Insert key in steering lock cylinder and turn to ACC position.
11. Using screwdriver or suitable pointed tool, push lock pin of steering lock cylinder inward, then pull lock cylinder outward to remove.
12. Reverse procedure to install. Refer to "Supplemental Restraint Systems" for clockspring installation procedure.
