chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Front Suspension - Knocking, Clunking Noise|Page 5077 > < Recall 97V201000: Control Arm/Ball Joint Separation
Page 1
background image

Technical Service Bulletin # 02-08-96

Date: 961220

Front Suspension - Knocking, Clunking Noise

NO: 02-08-96

GROUP: Front Suspension

DATE: Dec. 20, 1996

SUBJECT:

Front Suspension Noise Diagnosis

MODELS:

1995 - 1996 (FJ) Avenger/Sebring/Talon

SYMPTOM/CONDITION:

Popping, knocking, clunking, etc. type noise in the front suspension while driving over various road surfaces.

DIAGNOSIS:

Make a note of the conditions present when the customer recognizes the noise (vehicle speed, while turning, over large bumps, etc.). Drive the vehicle to
duplicate the sound so when repairs are made they can be verified for effectiveness. If the exact location of the noise cannot be determined, check the
installation of all suspension related parts for wear, damage, and tightening torque. If the basic inspection does not uncover any obvious conditions,
proceed with the Repair Procedure.

PARTS REQUIRED:

2

MR297498

Stabilizer Bar Bushing 2.0L Non Turbo (16 mm dia.) New

2

MR297501

Stabilizer Bar Bushing 2.5L/2.0L Turbo (19 mm dia.) New

1

GMR296295

Lower Lateral Arm, LH New

1

MR296296

Lower Lateral Arm, RH New

AR (2)

MB892981

Link, Stabilizer

AR (4)

MB518785

Cover, Stabilizer Link

AR (2)

MB808555

Cover, Lower Lateral Arm

AR (2)

MB808084

Cover, Upper Arm

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:
13-30-01-99 Check Torque of Crossmember Bolts
and All Suspension Related Parts, Road Test

0.6 Hrs.

02-20-10-94 Includes Above, Plus Check Stabilizer

Bushings for Play, Remove and Check Stabilizer Link

Breakaway Torque (Both Sides)
Replace as Necessary

1.1 Hrs.

02-10-03-90 Includes Above, Plus Check Free Play
and Dust Cover Condition of Lower Lateral Arm
Ball Joints (Both Sides), Road Test

1.6 Hrs.

02-10-55-92 Includes Above, Plus Check Upper Arm
Ball Join Breakaway Torque and Condition of
Dust Cover (Both Sides), Road Test

2.2 Hrs.

02-10-02-90 Includes Above, Plus Check Lower
Compression Arm Ball Joint Breakaway Torque
and Dust Cover Condition (Both Sides)

2.9 Hrs.

Front Suspension - Knocking, Clunking Noise|Page 5077 > < Recall 97V201000: Control Arm/Ball Joint Separation