Sebring V6-2.5L SOHC 24 Valve (1996)
2. Use the special tools to push out the drive shafts from the hub.
3. Shift the knuckle to the outside in order to maintain the clearance between the front hub assembly mounting bolts and the drive shaft.
CAUTION:
-
Do not damage the ball joint.
-
For vehicles with ABS, be careful not to damage the rotor.
INSTALLATION
Install in reverse order of installation, noting the following.
Fig. 7 Driveshaft Washer Installation
1. Be sure to install the drive shaft washer as shown.