Sebring V6-2.5L VIN N (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit Components Removal
REMOVAL
CAUTION:
1. Handle the hydraulic unit carefully, because it is much heavier than you expect.
2. Do not disassemble the hydraulic unit.
3. Do not drop or subject the hydraulic unit to serve shocks.
4. Do not turn the upside down or tilt the hydraulic unit.
1. Drain brake fluid.
2. Remove LH side splash shield.
3. Remove air cleaner assembly.
4. Remove Engine Control Module (ECM)
5. Remove relay box bracket.
6. follow removal procedure in above image.
INSTALLATION
1. Follow removal procedure in reverse order, with note to following information.