Sebring V6-2.5L VIN N (1997)
Lubrication Points On Caliper And Pad Assemblies
DISASSEMBLY
NOTE: When disassembling the disc brakes, disassemble both sides (left and right) as a set.
2. When removing piston boot and piston, protect caliper body with shop towel. Blow compressed air through brake hose to remove piston boot and
piston.
CAUTION: Blow compressed air gently or wear eye protection.
3. Remove piston seal with finger tip.
CAUTION: Do not use a flat-tipped screwdriver or other tool to prevent damage to inner cylinder.
