Sebring V6-2.5L VIN N (1997)
3.
Carefully lift the door panel substrate at the location of the three plastic tabs to dislodge them from the panel Figure 2.
NOTE:
USE CARE WHEN PRYING THE SUBSTRATE FROM THE GARNISH. EXCESS FORCE WILL CAUSE THE TRIM PANEL TO BE
DAMAGED.
Install the new garnish into the trim panel. Install the two screws, do not over tighten.
NOTE:
EXCESS TIGHTENING OF THE SCREWS CAN DAMAGE THE GARNISH.
5.
Reinstall the door trim panel.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-20-23-90 Right Side
0.4 Hrs.
Labor Operation No:
23-20-23-91 Left Side
0.4 Hrs.
FAILURE CODE:
P8 - New Part
