Sebring V6-2.5L VIN N (1997)
EGR Valve: Testing and Inspection
EGR VALVE INSPECTION
1. Remove the EGR valve and inspect for sticking, carbon deposits, etc. If contaminants are found, clean the valve with a suitable solvent so it will
seat correctly.
2. Connect a hand vacuum pump to the EGR valve.
3. Apply 67 kPa (20 in.Hg) of vacuum, and check that the vacuum is maintained.
4
Apply vacuum according to the chart below, and check the passage of air by blowing through either side of the EGR passages.
Vacuum / Passage of Air
-
6.5 kPa (2.5 in.Hg) or less = Air blows cut of opposite passage.
-
20 kPa (6 in.Hg) or more = Air does not blow out of opposite passage.
