Sebring V6-2.5L VIN N (1997)
Stabilizer Link: Testing and Inspection
Rear
BALL JOINT DUST COVER INSPECTION
If a dust cover is cracked or damaged, replace the stabilizer link.
STABILIZER LINK BALL JOINT FOR BREAKAWAY TORQUE CHECK
1. After shaking the ball joint stud several times, install the nut to the stud and use the special tool to measure the breakaway torque of the ball joint.
The standard value is 0.5 - 1.5 Nm (4 - 13 inch lbs.).
2. When the measured value exceeds the standard value, replace the stabilizer link.
3. When the measured value is lower than the standard value, check that the ball joint turns smoothly without excessive play. If so, it is possible to
use that ball joint.
